Non-neutral items are not accessible, and all stones are afraid of acid and alkali. For example, acid often causes the oxidation of sulphide minerals in granite to cause vomiting. The acid will decompose the calcium carbonate contained in the marble and cause the surface to be eroded. The alkali will also erode the feldspar in granite and quartz. The crystal grain boundaries of the material cause the phenomenon of grain exfoliation. Therefore, non-neutral items destroy the original fierce stone mirror.
Do not wax it at will. There are many kinds of wax on the market, such as water-based wax, stearic acid wax, oily wax, acrylic wax and so on. These waxes basically contain acid-base substances. Not only will it block the capillary pores of stone breathing, but it will also be stained with dirt to form wax scales, which will cause yellowing on the stone surface. However, if pedestrians and places where the flow of goods is extremely high must be on wax, they must consult a professional maintenance company for guidance on the use of wax and maintenance.
Do not use non-neutral detergents. In order to achieve quick cleaning effect, the general cleaning agent contains acidity and alkalinity. Therefore, if the detergent with unknown ingredients is used for a long time, the surface gloss of the stone will be lost, and the non-neutral agent residue is also the main cause of the stone disease in the future. .
Do not cover carpets, sundries for a long time. In order to keep the stone breathing smoothly, you should avoid covering carpets and sundries on the stone surface for a long time. Otherwise, the moisture under the stone cannot be evaporated through the capillary pores. The stone will suffer from an annoying stone disease due to excessive humidity and increased water content. If you must lay carpets and pile up debris, please do not forget to change them.
Be completely clean and clean. Whether hard granite (hardness HRs88-111±4-7) or soft marble (hardness HRs46-77±3-5) are not resistant to the long-term turbulence of wind sand and soil particles. Therefore, from time to time use dust collectors and electrostatic mops to do a good job of dust removal and cleaning. Commercial space entrance into the best place to place dust mats, sand grains covered in the filter shoes after the home is best to wear slippers after entry, to reduce the chance of sand dust wear stone surface.
Regular maintenance, maintenance gloss . Light dust alone, cleanliness can not let the bright stone gloss persist. Therefore, we must regularly ask a professional company to send people to do maintenance and maintenance of gloss regeneration. For example, recrystallize the marble surface with crystallization liquid, or use marble powder or granite surface for polishing, or use polishing powder to make marble or flower. Glossy stone surface regeneration, or the use of breathable gloss protection agent and so on. You can keep your stone as new.
Immediately remove the contamination. All stone materials have natural pores, and the sources of contamination (oil, tea, coffee, coke, soy sauce, ink, etc.) will easily penetrate the pores along the interior of the stone, forming annoying stains, so be sure to choose good quality stone Special protective agent applied on the stone to prevent pollution source pollution stone. It should be noted that all protective agents are unlikely to block pollution for a long period of time. Therefore, once a source of pollution falls on the stone, it must be immediately clear to prevent penetration into the capillary pores.
Always ventilated and dry. Stone is afraid of too much humidity in the environment. Water vapor will produce hydration, hydrolysis and carbonation of the stone, resulting in water spots, bleaching, weathering, erosion, rust and other diseases, destroying the stone. Therefore, the stone installation should always be ventilated and dry.
Protect it regularly. To ensure the longevity of stone, and to prevent the penetration of water and pollution sources, it is necessary to protect it regularly (depending on the type of stone and the quality of the protective agent, it is best to make 1- 2 this treatment for 1- 3 years).
The quality of the protective agent must pay special attention. After work, it must be able to maintain the permeability of the stone and waterproof, anti-fouling. Never use a protective agent with unknown origin to avoid not only preventing the effect but also increasing the maintenance of the stone.
Carpet decoration company marble space