The Chinese medicine mixer is a single-axis, single-blade type. Its blade design is both practical and innovative. As the blade rotates, the material rolls down and the blade moves through it, creating a controlled pushing force in both left and right directions within the mixing tank. This ensures that no part of the material remains stationary, resulting in a uniform mix. To maintain the mixer properly, follow these steps: 1. The machine should be used regularly. The gear reducer oil must be replaced every three months. When replacing, make sure to clean the gear unit thoroughly before adding new oil. 2. Inspect key components such as worm gears, worms, bearings, and oil seals at least once or twice a month. Check if moving parts are smooth and if all fasteners are tight. If any issues are detected, address them immediately to prevent further damage. 3. If you notice unusual vibrations or strange noises while the machine is running, stop it right away to avoid potential mechanical failure. 4. Keep the electrical control system clean and ensure it functions properly. Any faults should be repaired promptly to maintain safe operation. 5. When disassembling or assembling the slurry container, handle it carefully. Lift it gently, place it steadily, and avoid any actions that could cause deformation or damage. 6. After each use, remove all residual materials from the machine. If the machine will not be used for an extended period, clean it thoroughly and apply anti-rust oil to its surface. Cover it with a tarp to protect it from dust and moisture. Ningbo FLK Technology Co., Ltd. , https://www.flk-global.com