Cooler maintenance

1. Perform regular inspections according to a scheduled plan based on equipment operation and customer requirements.

2. To ensure optimal performance of the evaporative cooling unit, use this product under the following conditions:

• Ambient Temperature: 18°C to 45°C
• Relative Humidity: ≤85%
• Atmospheric Pressure: 86kPa to 106kPa
• Water Supply: Softened water, with a temperature not exceeding 45°C and pressure between 0.15-0.6 MPa.
• Voltage: Deviation should not exceed ±10% of the rated voltage.
• Air Quality: The environment must meet GB 3096 standards (Level 3 or higher).
• Environment: Non-corrosive and free from flammable materials.

3. This product is flammable. Avoid any contact with fire during transportation, installation, or operation.

4. Before using the unit, make sure that the inlet and drain pipes are properly connected. Improper connections may lead to leaks, which could damage other equipment or products.

5. For best performance, ensure there are sufficient open doors or windows for air circulation. If natural ventilation is limited, consider using blinds or additional mechanical ventilation systems.

6. Do not disassemble components like the evaporator or top cover while the machine is running. If maintenance or repairs are needed, always turn off the power first to avoid damage or personal injury.

7. Check the motor condition during installation. Never use fuses or wires with incorrect specifications.

8. In areas with poor air quality, it's recommended to install an air filter to improve efficiency and prolong the life of the unit.

9. For environments with strict humidity and temperature control needs, consult a professional for proper guidance and installation.

10. If you notice any unusual behavior or malfunction, contact the company or authorized service center immediately for assistance.