Introduction to positioner operation ![China Hardware Business Network]()
Positioner operating procedures:
1. Observe the welder's safe operating procedures.
2. When installing and removing the workpiece, check that the circular pressure plate has been removed and that the pressure plate is returned to the position to prevent the workpiece from damaging the clamp.
3. When lifting the workpiece, it must be level and not swinging to prevent the workpiece from colliding with the fixture to avoid damage to the fixture.
4. When lifting the workpiece, it must be installed securely before the sling can be removed from the workpiece.
5. When disassembling the workpiece, the workpiece must be lifted with a sling before the workpiece can be loosened.
6. When the workpiece falls on the fixture, it should be placed lightly and must not have excessive impact on the fixture and the positioner.
7. The workpiece must be installed according to the requirements. The nuts and bolts of all fixtures should be tightened, the pressure plate should be pressed tightly, and the test should be turned after the installation is completed.
8. Before turning, check if there are any other items in the working range to avoid collision.
9. After the workpiece is transferred to the working position, the power switch must be turned off to cut off the power supply to prevent malfunction.
10. Workpiece installation must pay attention to the work center and must not deviate from the center of gravity.
11. Do not carry overweight or overload.
12. When the workpiece needs to be raised and welded, the climbing pedal must be used, and the climbing pedal must be placed securely before lifting.
![China Hardware Business Network]()
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn358 security fences are extremely difficult to penetrate, with the small mesh aperture being effectively finger proof, and extremely difficult to attack using conventional hand tools. 358 fences are recognized as one of the most difficult to break through the barrier, because it is difficult to climb. It is called security fencing and high- strength fencing. 358 security fencing panel can be bent in part to enhance the aesthetic effect.
358 Fence
358 Mesh,358 Fence,358 Security Fence,358 Anti Climb Fence
Anping County Kairong Wire Mesh Products Co., Ltd. , https://www.krmeshfence.com