Three Functions Hand Shower,Tri-Functional Hand Shower,Triple Function Handheld Shower,Square Push Dial Hand Showe ASHOWER , https://www.ashower.com
To ensure the proper use and maintenance of your washing machine, follow these essential guidelines:
First, always empty your pockets before washing. Fasten metal buttons on clothing to prevent them from scratching or damaging the inner drum during the wash cycle. Turn clothes inside out so that metal parts are not exposed, reducing the risk of damage to both the garments and internal components like the agitator or drum.
Second, avoid overloading the washing machine. Always stay within the recommended load capacity, and make sure the water level doesn’t drop below the minimum mark. Overloading can cause the motor to overheat, leading to premature wear and potential failure. Most machines have a specified maximum weight, typically around 3–5 kg for standard models. Exceeding this may result in poor cleaning performance, increased fabric wear, and even motor burnout.
Third, pay attention to the water level. Too much water can cause overflow, while too little may reduce washing effectiveness and increase wear on fabrics. For example, when washing 1.5 kg of clothes, about 30 liters of water is sufficient, and for 3–5 kg, around 50 liters is ideal. Proper water levels help ensure even tumbling and better cleaning results.
Fourth, keep the washing water temperature moderate—ideally around 40°C. Never exceed 60°C unless it’s a high-temperature disinfection model. High temperatures can damage the tub, cause plastic parts to warp, or degrade insulation. If you need to heat the water, always add cold water first before heating to avoid overheating the machine.
After each wash, drain the wastewater thoroughly and rinse the drum with clean water. Wipe down any moisture inside and outside the machine with a dry cloth. Return all control knobs and buttons to their original positions, and make sure the drain valve is closed. Store the machine in a dry, well-ventilated area to prevent mold and rust.
Avoid using harsh chemicals like strong alkalis, gasoline, or abrasive brushes when cleaning the machine. Also, be careful when cleaning filters or drains—never use sharp tools that could damage internal parts.
Regularly inspect the power cord for any signs of damage or aging. If you notice any issues, replace the cord immediately to avoid electrical hazards.
Some washing machines come with oil ports on the agitator sleeve. You can apply a small amount of lubricating oil every few months to maintain smooth operation.
Be mindful of washing time. While longer cycles might seem more effective, they don’t necessarily lead to better results. After a certain point, the cleaning efficiency plateaus, but the wear on your clothes increases. It’s best to follow the recommended cycle times.
Lastly, always ensure the grounding wire is properly connected. The metal casing and electrical components should remain insulated. If the insulation fails due to wear or damage, the casing could become live, posing an electric shock hazard. Keep the grounding system in good condition to protect yourself and others.
By following these tips, you can extend the life of your washing machine and ensure safe, efficient operation.