One open five-hole socket wiring method socket installation precautions

As people's income level increases, the socket is a kind of decoration material that we use every day. I believe everyone will be familiar with it. Also said that there are a lot of home appliances in the decoration people, our mobile phones, tablets, charging treasures need to use sockets. So what is the opening method of a five-hole socket? Today, Xiaobian will take a look at the wiring method and installation precautions for a five-hole socket .

One open five-hole socket wiring method

Discriminate the fire ground zero: pay attention to observe: after the socket switch is generally marked: "fire L", "zero N", "ground E", in addition, through the color can also be distinguished: fire --- red, zero - -- Green, ground --- flower color.

Only control the connection of the lamp: in this case, the socket always has electricity, but the switch of the lamp needs to be controlled.

Full control practice: This situation is the power of the socket to be controlled by the switch

Billing control with five-hole socket connection (switch control socket): This situation is less common, switch control socket.

Under normal circumstances, there are only two incoming lines, one hot line and one zero line (there is no ground line at this time), it must be distinguished which one is the hot line and which is the zero line, to avoid incomplete factors.

After the connection is completed, install the switch box, and then power on the test. If there is a sound indicating that the line connection may be short-circuited, power off and check carefully.

Precautions for opening a five-hole socket

1. Generally, the open five-hole socket of the mounted wall should be no less than 1.8m from the ground; the concealed power socket is 0.3m away from the ground. In order to prevent children from touching, it is best to purchase a safety socket with an insurance cover. The height of the same indoor socket should be the same, and the on/off position of the switch should be the same.

2. When installing the single-phase two-hole socket, if the socket hole is placed in the horizontal direction, it should be “left zero, right fire”; if the socket hole is placed in the vertical direction, it should be “fired, lower zero”. The three-hole socket should be “left zero, right fire”, the protection ground is at the upper end, the neutral line and the protective ground must not be connected incorrectly, and the neutral line and the protective ground are not allowed to be connected together. The number should be seated against the color of the wire.

3, the bathroom environment is relatively humid, should use insulation level high waterproof splash-proof two open five-hole socket; refrigerator, air conditioner, color TV, computer, washing machine, etc. should use "independent", with protective grounding quality and reliable Three-hole socket with switch, it is best not to use two-open five-hole socket.

4, each wall of the living room bedroom, the distance between the two sockets is not higher than 2.5 meters, within the range of 0.6 meters, at least one spare two open five-hole socket.

5, the kitchen, bathroom, terrace two open five-hole socket installation when as far as possible from the water area. If you need to be close, add a socket splash box. A hair dryer and a power socket for shaving can be installed next to the basin mirror. It is suitable for 1.5 to 1.6 meters from the ground.

The function of the switch is to control the electrical appliances and switches in the home. Therefore, it is very important to choose a good material switch, so as to ensure that everyone can safely use electricity, the above is a small series that is introduced for everyone today. Hole socket wiring method and installation precautions are here to end. For more information, please continue to pay attention to the decoration home.

More related wonderful reading:

One open five-hole socket wiring method socket installation precautions

Five-hole socket wiring method introduction Five-hole socket wiring specification introduction

Five-hole socket wiring method Five-hole socket wiring precautions