Bathroom tile waterproof construction method how to use waterproof agent

When a new house is renovated, the bathroom is sure to use tiles, and the bathroom is a place that needs contact with water every day. Therefore, many owners will be very concerned and worried about whether the tiles are waterproof. Today Xiaobian introduced the construction method of bathroom tile waterproofing to everyone, and let's take a look at it.

1, bathroom tile waterproof construction method

a. Cleaning and maintenance surface

First, the dirt and debris on the surface of the ceramic tile should be emptied. If there is dust, oil or water on the surface, it should be cleaned, and the surface should be kept dry. The original glass glue or other waterproof material was used. Need to be clear and clean.

b, clean up the gap between tiles

Make sure that you don't have enough solid stuff in the floor tiles to clean out. Remember, don't sew the gaps in the tiles, just clean up the unexplained fillings.

c, spray waterproof agent

Each part of the tile needs to be sprayed with some water repellent, and when spraying, be sure to spray evenly. After the waterproofing agent is completely dried, all the tile joints need to be filled with caulking paste, and the roots and damages should be filled. Defective parts, including wall tiles that can pour into water, are caulked.

d, plastic mud to do waterproof edge

If there is a large gap between the ground and wall joints, then plastic steel mud should be used here as a waterproof edge, around the pipe roots and around the floor drain, tile damage, defects, and thresholds are all weak In the link, plastic steel mud should be used for waterproofing and sealing. Adhesion should be firm enough.

e、Disable clear water for drying

After the water-repelling construction part is over, it is necessary to ensure that the location that has been constructed within forty-eight hours does not touch the water, and it is not until the plastic paste of the caulking paste is completely dried that the water can be seen. Waterproof construction methods for bathroom tiles are introduced.

2, how to use waterproof agent

When applying waterproof material, you can use the nozzle to spray, or you can use the brush to brush directly. If you can, it is better to apply the side brush to the construction so that the waterproof agent can be evenly distributed on the surface without seeing the phenomenon of leakage. It will also fully penetrate into the surface and provide a good waterproof effect.

Xiaobian conclusion: The above is all about the bathroom tile waterproof knowledge introduced, I believe that everyone through the Xiaobian comprehension content, should have a certain understanding. There may be owners who would say that these are handed to the decoration masters, or why they are asked to spend money on them. It is correct to say so, but as the owner himself is very necessary to understand these basic decoration knowledge, The decoration can play a supervisory and auxiliary role, why not do it.