NTN bearing effect and selection

Source: Bearing network time: 2018-01-17

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Following the advancement and development of society; mechanization is widely used in production and in the days. NTN bearings are not a part of machinery; their use will be more and more extensive; NTN will be used in local areas where there is only a change. Bearing.
NTN bearings mainly support and reduce the friction in the machine; so the accuracy and noise of NTN bearings are directly related to the operation and life of the machine.
The NTN bearing type is usually selected by the user's technician based on the operating conditions of the accessory product and the load acceptance. If the NTN bearing does not meet the operational requirements, it should be promptly selected from the head; however, unless the special product is usually selected on the type of selection. There won't be any problems.
NTN bearing is a high-precision product; if the installation is not easy, it will damage the NTN bearing channel; cause NTN bearing damage. NTN bearing should have a special mold when installing; can not be hit at random; can only be small when pressed into the shaft The force is applied to the ring; only a large circle of force is required when pressing the large circle. The air pressure or hydraulic pressure is required for installation; the upper and lower molds are to be horizontal when the press is installed; if the skew occurs, the NTN bearing channel may be damaged due to the force; Make the NTN bearing sound.
The life of NTN bearings is closely related to the production, installation and operation; it must be done at every stage; in order to make NTN bearings in the best working condition; then extend the service life of NTN bearings.

Recommend to friends comments close window

Bearing related knowledge

SKF bearing: smoothness affects the rotation accuracy
NSK bearing type prefix and suffix knot code clarify the foreign mechanical occupation bearing heat disposal method (below)
Bearing skill condition rolling bearing "detailed analysis of the target"

This article links to http://
Please indicate China Bearing Network http://

Previous: Correct use of rolling bearings Next: INA needle roller bearings

A flange can also be a plate or ring to form a rim at the end of a pipe when fastened to the pipe. A blind flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.

Although the word flange generally refers to the actual raised rim or lip of a fitting, many flanged plumbing fittings are themselves known as 'flanges':

There are many different flange standards to be found worldwide. To allow easy functionality and interchangeability, these are designed to have standardised dimensions. Common world standards include ASA/ASME (USA), PN/DIN (European), BS10 (British/Australian), and JIS/KS (Japanese/Korean). In the USA, ANSI stopped publishing B16.5 in 1996, and the standard is ASME B16.5

Flange And Fitting

Flange And Fitting,Vacuum Flanges and Fitting,Steel Pipe Flanges and Fittings,Flange Clamp and Flange Fittings

Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com