Matters to be taken when using the puller to remove the bearing

Source: China Bearing Network Time: 2013-08-29

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1. When pulling out the bearing; be sure to pull the immediate screw and the middle of the shaft together; do not hurt the thread, shaft diameter and shoulder on the shaft, etc.
2, when loading the horse, the top of the head puts the best copper ball; the initial pull is slow; don't overdo it; in the pull board, it should not happen.
3, pull the pull position of the puller to be correct; pull the grip should pull the inner ring straight; to prevent the pull and fall; use the wire to tie the tie rod together,
4. The spacing between the tie rods and the length of the tie rods should be flat; prevent deflection and uneven force.

Recommend to friends comments close window

Bearing related knowledge

Bearing steel quality requirements and shortcomings (1)
The use of partial pain to determine the Y-bearing polyurethane coating of the ring non-marking bearing rolling bearing experience determination method magnetic motor ball bearing layout characteristics

This article links to http://
Please indicate the bearing network http://

Previous:Classification and determination of shaft seals Next: INA high-speed fine-angle touch ball bearing device

small bag package mostly used for NPK water soluble fertilizers.

In some countries and areas, farmers usually buy NPK in small quantity. The big bag is easily to caking if open in the air for long time.

Small package is good for its transform , storage and retails.

Samll bags with attractive design of color bag, strong carton as outter package. These will make more added profit. The nice package will be ealy accepted and remind for its brand.

We can do PE, alluminium material, and other kinds of plastic materials.

Small Bag Fertilizer

small bag

Hebei Monband Water Soluble Fertilizer Co., Ltd. , http://www.wsfertilizer.com