What do you need to know about housing acceptance test?

Everyone knows that we need to carry out housing inspection before signing a new house to prevent various problems in the house and affect our quality of life. Then what are we talking about? The following small series will take you to understand what the housing acceptance test has.

What are the aspects of the housing acceptance test ?

1, check the wall, roof

In the acceptance of the house, we need to carefully check the walls of the house. If there are cracks in the roof, whether the yin and yang of the roof and the wall are horizontal lines, we need to gently tap the wall with a small hammer when checking the wall. If there is an empty sound, if there is, it means there is a hollow in the wall. It is best to use chalk to draw a circle around the empty ring. When we inspect the wall, we must also look at whether the water-resistant putty on the wall is qualified. The method is very simple. We can splash mineral water on the wall and touch it with water. If there is no mud, it means that it is qualified. .

2, check the ground

We check the ground is mainly to see if the ground is flat, you can use the ruler to measure in the highest and lowest places to see what the error is. The ground also needs to see if there is cracking and whether it will turn sand back. The way to check the sand control is only when we need to use the ankles. If there is no sand, it means there is no sand control.

3, check the doors and windows

When checking doors and windows, we note whether they have a stable installation, whether the installation of the accessories is correct, and whether there is any missing phenomenon. When we open and close the doors and windows, if there are gaps in the doors and windows, whether the sliding is smooth, the surface of the doors and windows is smooth. Neat, there are no cracks.

4, check the circuit, water, gas pipeline

We check the circuit is mainly to check the socket and switch settings reasonable? Need us to modify it? We can take a pencil to check whether the socket is powered. As for the voltage test, it is best for professionals to check. Check the waterway is very simple, mainly to see if the water pipe drainage is smooth, we just need to pour water to check it. Gas lines are best checked by professionals.

5, waterproof

The waterproofing of the house is also an important item in the housing acceptance test . We mainly inspect the waterproof of the kitchen and toilet. We need to block the drainage of the kitchen and toilet. The water in the kitchen and toilet is generally about 2CM high, and then it is 24 When you are young, look for leaks. When doing waterproofing, it's best to do it with upstairs and downstairs users.

Xiao Bian concludes: The above is the content of the housing acceptance test that Xiaobian introduced. It is hoped that after reading this article, we can provide reference and help for everyone in the housing inspection.

Eye Nut

Eye Nut,Anchor Eye Nuts,T76 Anchor Eye Nuts,Ring Eye Nut

J.B Machinery (Ningbo) Co., Ltd. , https://www.jbdrill.com