3 Flutes Chamfer Cutters for Aluminum,HRC58 Chamfer Cutters for Aluminum,Carbide Chamfer Cutters for Aluminum Suzhou Meiwei Cutting Tools LTD , https://www.meiweitools.com
**Powerful Magnetic Separator: Practical Technology from Henan Power Magnetic Separation Equipment Manufacturing Co., Ltd.**
Henan Power Magnetic Separation Equipment Manufacturing Co., Ltd. is a high-tech enterprise specializing in the research, development, and production of magnetic separation technology. We are proud to introduce a wide range of permanent magnet and high-intensity magnetic separators designed for efficient mineral processing. As one of the oldest mechanical equipment used in mineral separation, it is crucial to ensure safe and reliable operation at all times.
Our advanced magnetic separation technology ensures smooth and secure operation through intelligent control systems that manage the start-up, shutdown, and fault handling during continuous magnetic separation. Additionally, we pay close attention to the intermittent ore feeding process and other critical operational aspects. Below, we provide a detailed guide on how to ensure the safety and efficiency of your magnetic separator:
**1. Installation Guidelines**
- If installing the equipment on an elevated platform (e.g., a floor), it is recommended to use a flat frame made from I-beams. The frame should be as long as possible along the stroke direction to enhance seismic resistance.
- For installations near the ground level, a reinforced concrete foundation is strongly advised to ensure stability and durability.
**2. Operational Precautions**
- Before starting the machine, check the power lines, transmission system, lubrication system, and surrounding environment. Ensure everything is in order before opening the water pipes for each part of the equipment and then feeding the ore. When stopping, stop the ore feed first, then gradually close the water valves.
- Prior to use, fill the gearbox with the appropriate amount of gear oil—3 kg for the 250 model and 4–5 kg for the 350 model. Lubricate all bearings thoroughly.
- Adjust the magnetic system’s yaw angle when in use. Pull the adjustment screw to set the high edge of the magnetic system 10–20 mm above the horizontal line of the tank discharge port.
- The machine performs best with particles between 60–80 mesh, and it can effectively recover fine slimes down to 40 microns.
- Properly adjust the flushing water for both the tailings and concentrate. Too much water may increase the grade of tailings, while too little may prevent full loosening of the ore, affecting the sorting performance.
- The concentration of the feed material directly affects the slurry flow rate and sorting time. A reasonable feed concentration of 25–35% ensures optimal performance, balancing recovery rate and concentrate quality.
**3. Maintenance Tips**
The permanent magnets used in the magnetic system are sensitive to high temperatures and acidic environments, so proper protection is essential. During maintenance and daily use, strictly monitor technical parameters and working gaps to maintain optimal performance and sorting efficiency.
For more information about our magnetic separators and wet sorters, visit our website: [http://news.chinawj.com.cn](http://news.chinawj.com.cn). Contact us today for assistance—Deng Manager is available to answer your questions.
*This content was written by a real person, providing practical guidance based on real-world experience.*