LEDER technology`s ceiling light takes fashion design, more stereoscopic than other flat ceiling lights. Ideal luminous output for indoor use,step-less dimming, white light, warm light, neutral light, three bright modes are available. Perfect for balcony, bar, cafe, clothing store, aisle, etc.
This flush mount edge-lit LED technology of the ceiling light channels the light to the side of the fixture and then redirects it downwards, creating a uniform light distribution without hot spots, flicker or glare.Station it in the dining room above a rectangular table to find just the right light at your next casual dinner gathering, or hang it up over the entryway to put a spotlight on the foyer as guests walk in.
Features:
• Fashion design
• Easy to install
• Incandescent, and CFL
• Energy saving electricity
• Product Type: Semi flush mount
• Color temperature :3000k-6000K
• Sloped ceiling compatible
• Type of protection: IP20 /IP65 (Some models)
• Warranty:3 - 5 years
LED ceiling lights are an especially good choice for anyone looking for a lamp which is elegant in an understated way. If you want a lamp that discreetly keeps itself out of the way, yet looks great once you actually pay attention to the ceiling light, you have definitely come to the right place. This ceiling light will do its job very well.
We have rich production experience in lighting. Except LED Ceiling Light, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light, Track Light , Linear Light , LED Strip Light , LED Tube Light , LED Bulb , as so on .
Bedroom Ceiling Lights,Bathroom Ceiling Lights,Home Depot Ceiling Lights,Semi Flush Ceiling Lights JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightoutdoor.com
In the overhaul work of metal cutting machine tools, it is often encountered to replace the new lead screw and the light bar, and the matching parts (sets, clutches, cranks, etc.) do not need to be replaced. The lead screw, the light bar and the fitting are generally connected by a tapered pin. How to make the taper pin hole on the new lead screw and the light bar to keep it concentric with the original taper pin hole on the fitting, so that the fitting is not scrapped. We have found a good way in many years of overhaul work, simple and reliable, and to ensure concentricity. The following takes the X51 vertical milling machine table screw and clutch as an example to introduce the specific method as follows: