Heating common faults and troubleshooting

Heating systems are essential for maintaining comfort in homes and buildings, especially during colder months. However, they can sometimes experience issues that affect their performance. Here are some common heating problems and how to address them:

(1) Common Failure: The overall heating is not hot.

This usually indicates a problem with the system's flow of hot water or steam. It could be due to closed valves, blockages, or low pressure.

Remedy: Check and open the inlet and outlet valves to ensure proper water flow. If the issue persists, it may require professional inspection.

(2) Common Fault: The temperature of the heating pipe is not enough, and the room temperature is too low.

This can happen if the incoming water is not sufficiently heated or if there’s an issue with the circulation pump.

Remedy: First, check the inlet water temperature. If it's too low, increase it if possible. You can also consult the property management system to see if there are any ongoing maintenance issues affecting the heating system.

(3) Common Fault: Water leaks near the inlet and outlet valves (close to the heater).

Leaks around the valves can lead to water damage and reduced efficiency. This might be due to worn-out seals or faulty connections.

Remedy: Immediately close the inlet and outlet valves to prevent further leakage. Then, contact the installation team or a qualified technician for repairs.

(4) Common Fault: Water leakage outside the inlet and outlet valves (near the main pipeline).

This type of leak is more serious and can affect the entire system. It often occurs due to corrosion, aging pipes, or improper installation.

Remedy: Notify the property management to shut off the system valves immediately. Then, call the installation team or a plumbing service for urgent maintenance.

Regular maintenance and prompt attention to these issues can help extend the life of your heating system and ensure it operates efficiently throughout the winter season.