Four tips for toilet maintenance teach you to maintain a refreshing bathroom

The bathroom is a living space that we can't lack, but it is also a place where bacteria can easily breed. Among them, we have to say that our toilet is relatively easy to hide dirt, so we must do a good job of cleaning. You have some daily cleaning tips.

1. The bacteria in the toilet ring should focus on cleaning

The investigation found that 32% of the toilets had dysentery bacilli, and one of the dysentery bacilli named "Song" lived on the toilet seat for up to 17 days; another experimental report also pointed out that 100 million spinal gray matter The virus was put into the toilet, and there were 3,000 viruses on the seat. At the same time, many people like to put a velvet gasket on the toilet in winter, which makes it easier to adsorb and retain the pollutants and spread the disease more likely.

The place where the pollution is so severe is the most "intimate" contact with people's skin. Therefore, it is important to clean it and wipe it with a diluted household disinfectant every other day or two. As for the cloth gasket, it is best not to use it. If it must be used, it should be cleaned and disinfected frequently. If possible, change to a toilet with antibacterial and splash-proof design.

2. Flushing

If the toilet lid is opened when flushing, the instantaneous cyclone in the toilet can carry bacteria or microorganisms up to 6 meters high and float in the air for several hours, thus falling on the walls and objects. In most families, toilets, washing, and showers are all carried out in the bathroom. Toothbrushes, mugs, towels, etc. are co-located with the toilet, which is naturally susceptible to bacterial contamination. Therefore, the habit of covering the toilet lid when flushing should be developed.

The toilet is easily contaminated with urine stains, feces and other contaminants. If it is found to remain remnant after flushing, it must be cleaned with a toilet brush in time, otherwise it will easily form yellow spot stains, and it will also breed mold and bacteria. In addition to the pipe mouth, the water outlet at the inner edge of the toilet and the outside of the base are hidden in the dirt. When cleaning, first lift the toilet ring and spray the inside with the toilet agent. After a few minutes, wash it thoroughly with the toilet brush. It is best to use a thin brush to better clean the inner edge of the toilet and the depth of the pipe, and then scrub the base and other gaps.

3. Try not to set waste paper on the toilet side

In normal times, it is also possible to place a gradually-dissolving automatic toilet cleaner or a wall-mounted disinfecting plug in the water tank to achieve the effects of cleaning, descaling, disinfection and sterilization by each flushing.

Most households have a trash can on the toilet to store used toilet paper, but this will cause bacteria to spread with the air, because few people can clean it at any time, at least for a day or two, and the longer The more bacteria that breed.

The toilet paper should be thrown into the toilet and washed away. As long as it is not too thick and too tough, the toilet paper can generally soften in the water quickly, so don't worry about clogging. When you need it, you can have a hygienic bag. There is no need to set up a waste basket. If you must use it, you should also choose a lid to prevent the bacteria from spreading and handle the used toilet paper in time.

4. The toilet brush should be kept clean and dry

The toilet brush is the hero of keeping the toilet clean, however, it can also be a source of pollution if you don't pay attention to cleaning and drying. Every time you brush the dirt, the brush will inevitably get dirty. It is best to rinse the water again, rinse it off, drain the water, spray the disinfectant, or regularly soak it in the disinfectant and put it in the right place. . It is advisable to hang the toilet brush, do not put it in the corner, and do not put it in an airtight container.

Jiuzheng Building Materials Network reminds: the bacteria in the toilet is harmful, do not underestimate it. Always pay attention to maintenance, happy life, you and me.

Nickel based alloys are very useful materials for the manufacture of high quality tubing products. One of the key reasons is that they offer excellent corrosion resistance in both aqueous and high temperature applications.

In addition to their high melting points and resistance to oxidation and corrosion, nickel alloys are very ductile. They can be electroplated and are easily welded, making them suitable for use in industries where very high and low temperatures come into play.